JUST DOUBLE THE BÄÄÄM

All CLUSTER products can be easily connected both horizontal and vertically, by using the integrated C-Lok system. The series is made to enable toolless multiple array configurations, scalable from a single vertical line, to massive matrix like arrays. CLUSTER Series will be continuously expanded with various other fixtures, to enlarge the range of possibilities. ROXX Audience Blinder are available as 2-lite or 4-lite individually adjustable pods, in either a warmwhite or fullcolor version.

CLUSTER B4 W

Warm white

In the warmwhite versions, an emulated ´shift to warm´ warms the color temperature of the light as it dims. To deliver a perfect classic tungsten look, Amber and Red LED´s are mixed with the highpower warmwhite LED´s when decaying. ROXX CLUSTER B4 W LED Blinder truly exceed the output of a conventional DWE blinder, while consuming 60% less power and being almost twice as bright and replaces the need of installing tungsten lamps at the rate of 500+ times.

CLUSTER B4 W

  • 4 x 300 Watts
  • WarmWhite + Amber + Red LED´s
  • Up to 40.000lm luminous flux
  • C-Lok Cluster System
  • Magnetic Pre-Link system
  • 4-lite Audience Blinder, Strobe, Wash
  • IP65 rated for Indoor & Outdoor use
  • Being almost twice as bright while consuming 60% less power compared to a conventional DWE blinder
  • Emulated “shift to warm” to mimic incandescent fixtures
  • Individually controllable Pods for stunning pixel effects
  • Integrated C-Lok system for toolfree and seemless CLUSTER setups
  • Pre-Link Magnets for easy alligning and “one-handed” operation
  • Multiple mounting locations for creative rigging options & floor mount
  • 16-bit dimming control for smooth, perfect fades
  • Four selectable dimmer curves with adjustable response
  • Adjustable PWM frequencies up to 25kHz guarantee flicker-free camera operation
  • Individual pan of each pod to allow for directional adjustments

1

FEATURES

Individual +-20° PAN adjustment, TILT adjustment when fixture is in vertical use.

2

MOUNTING

There are several mounting options – Camlock mounts on top and back enable the use of Omega-Brackets, Yokes can be attached to M12 mounting points on all sides, or the internal C-Lok system can be used for seemless interconnection. Pre-Link Magnets on top and side help to allign the fixtures and allows “one-handed” operation for secure locking.

 

CLUSTER YOKE 4.2,
included in the 4-Lite Version
CLUSTER YOKE 4.3,
optional for the 4-Lite Version
 

A specially designed rigging bracket is used for seemless connection of multiple Blinders, to avoid gaps due to bracing of the truss structure by variable, sliding mounting positions.

CLUSTER rigging bracket

Continous rigging throughsliding mounting positions

Tilt Scale

Multiple mounting points:

  • 3x Camlock with ¼ turn adapters
  • 3x M 12mm / ½“
  • 1x TV Spigot

3

FLOOR APPLICATION

Floor extensions and base plates can be used to create vertical structures in single or double rows.

CLUSTER yoke floor extensions

4

Protected with IP65

An IP65 rating is just what you need to protect your product from ingress of dust and rain. Our products are extensively tested to meet these standards and make our fixtures multifunctional, safe and durable in any situation.

B4 W

Photometrics
LED expected lifetime 50.000 hours
Lightsource 4x 300W Warm-White + Amber + Red
Type of optical system Reflector with Compound Eye Lens
LED PWM Frequency selectable 800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz
Beam angles (50%) 50°
Maximum Field angles (10%) 87°
Color temperature range 2.900K
CRI/Ra 80
Efficancy (max) 25,19 lm/W
Luminous flux 34.000 lm
illuminance Lux @ 1m / 3,3ft 37870lx / 3518fcd
illuminance Lux @ 3m / 9,8ft 4295lx / 399fcd
illuminance Lux @ 5m / 16,4ft 1535lx / 143fcd
illuminance Lux @ 7m / 23,0ft 795lx / 74fcd
illuminance Lux @ 10m / 32,8ft 395lx / 37fcd
Dimensions & Weight
IP class IP65
IK class IK08
Body material Aluminum, Nylon
Lens material Tempered glass front
Net dimensions (w x h x d) 400 x 400 x 191mm
Net dimensions inches 15,75 x 15,75 x 7,52 inches
Net weight (incl. Yoke) 16,2 kg (35,71lbs)
Tilt 360°
Tilt Locking System Locking system with toothing and angle indicator
Electrical Data
AC Power, max 90 – 285V 50/60Hz
AC Power, nominal 100 – 240V 50/60Hz
Electrical protection Overload protection with automatic recover
Max power consumption 1350W
Constant power consumption 440W
Power Max. Out 9A @ 230V / 2A @ 120V
Power Linking @ Max Power Consumption (Boost Mode) 1 unit @ 230V / 0 unit @ 120V
Power Linking @ Constant Power Consumption (Illumination Mode) 7 units @ 230V / 2 units @ 120V
Power Factor 0.944 PF (230V) /  0.998 PF (120V)
Power Supply Unit Inbuilt auto-ranging electronic switch-mode
Operator & Controller
DMX Functions Master Dimmer, Master Dimmer Fine, Shutter, Duration, Dimmer 1-4, Dimmer 1-4 Fine, Dimmer Curve, Dimmer Response, Redshift, Effect, Device Settings
DMX channels 1CH DWE, 4-1CH DWE, 4-2CH DWE, 7CH STROBE, 9CH STANDARD (default), 12CH EXTENDED, 17CH EXTENDED
DMX modes 7
Protocol USITT DMX512A
RDM ANSI E1.20
Setting and addressing OLED graphical display / 4 controls
RDM ANSI E1.20
Standalone mode Auto Program, Quick Light
Wireless DMX n.a.
Indicator OLED graphical display
Controls 4 touch sensitive, backlighted controls
Strobe 0-20Hz
DMX I/O IP65 XLR 5-pin male/female
Power In TRUE1 compatible input & link-thru sockets
USB Firmware Update IP65 USB socket
Installation
Mounting point by Yoke (included) 3x 13mm / 1/2″ holes, 1x centric TV Spigot attachement, 3x integrated Camlocks for Omega Brackets
Mounting point on fixture 1/4 turn Omega Bracket on top and rear side
Mounting point with otional Rigging Bracket 2x 13mm / 1/2″ holes for Clamp fixation
Orientation Any
Rigging possibilities Hanging or ceiling / pendant mount
Safety features 2x rear mount for safety wire
Minimum distance from flammable materials 0,3 meters (11,8 inch)

 

Thermal Characteristics
Cooling Active, Forced Air, Temperature-regulated
Humidity (max.) 95%
Temperature range, Operating  -40°C to 45°C
Temperature range, Start-up  -20° to 45°C
Temperature range, Storage  -40°C to 80°C
Thermal Protection Automatic overtemperature protection
Included / Optional
Included items Yoke 4.2, 2m Power Cable, Puk
Optional Accessories Yoke 4.3, Yoke Floor Extension, Rigging Bracket, Omega Bracket ST
Color options Black – RAL 9004 (Standard)
Custom color – any RAL (on request)
Compliance
CE – 2014/30/EU: EMC Directive
EN 55103-2
EN 55015
EN 61547
EN 61000-3-2
EN 61000-3-3
EN 55032
CE – 2014/35/EU: Low Voltage Directive
EN 60598-1
EN 60598-2-17
EN 62471
EN 60529
RoHS2 Directive
2011/65/EU
ETL C/US
FCC
UKCA
Order Number
CLUSTER Code

B2 FC

13202101

B2 W

13202001

B4 FC

13204101

 

Accessories Code

Yoke 4.2

13907701

Yoke 4.3

13907101

Floor Extension

13907201

Rigging Bracket

13907411

Case 4 pcs. /
8 pcs.

13907411

Case 2 pcs /
4 pcs.

13907511

Omega Bracket

90900002

 

Download the manual here!

Download the DMX chart here!

Download the fixture libraries here!

Soon available!

Soon available!

Download the technical drawing here!

Download the certificates & declaration here!

Download the data sheet here!

Soon available!

Soon available!

IP 65

The fixture is fully protected against dust and water jets from any direction.

Shift to warm

Switchable Shift-To-Warm function to simulate traditional halogen fixtures while dimming down.

Green Solution

ROXX CLUSTER Blinders consuming 60% less power comparing to classic DWE Blinders. Due to it´s LED lifetime of 50.000 hours it replaces the need of installing tungsten lamps (once blown) at the rate of 500+ times.

Dimming curves

Four high resolution dimming curves and adjustable dimming response to adapt to the respective application.

Stand Alone

Extensive stand alone modes for brilliant lighting effects even without the need of external controller.

Magnetic Pre-link

The magnetic pre-link system helps to align ROXX fixtures and allows “one-handed” operation for secure locking.

Flicker-free

Six selectable PWM frequencies up to 25kHz guarantees flicker free operation in front of camera, even at high-speed recordings.

Quicklight Function

Quick-light function allows a direct access to dimmer & CCT for easy and fast operation while setting lights.

C-LOK

The patented C-LOK system allows ROXX® devices to be connected together quickly and conveniently without tools.Scalable from a single vertical / horizontal line to massive matrix-like arrays.

OLED Display

OLED display with four touch-sensitive buttons, backlight- and auto flip function for easy configuration.

Temperature controlled fan

Temperature controlled fan for optimized and silent operation.

Maste & Slave

Once the fixture is set to “Master” and on first postion of the chain, it controls the following “Slave” units.

RDM enable

Remote Device Management enables bi-directional communication over DMX network, for external programming and monitring functions.

FCC

Besides the product compliance for european market this product is also FCC certified and complies to the requirements of the Federal Communications Commission.

Color Calibration

ROXX® color calibration guarantees vivid and uniform colors plus excellent whites precisley on the black body curve.

16-Bit Technology

16-bit technology for high-resolution color mixing and ultra-smooth dimming behaviour.

Intertek

Besides the product compliance for european market this product is also ETL certified and complies to the safety norms and requirements for North-America.

Accessories

CLUSTER Series | Blinder

CLUSTER B2 W

WarmWhite
(WW + AR)

CLUSTER B2 FC

Full Color
(RGBA + WW)

CLUSTER B4 W

Warm White
(WW + AR)

CLUSTER B4 FC

Full Color
(RGBA + WW)