JUST DOUBLE THE BÄÄÄM
All CLUSTER products can be easily connected both horizontal and vertically, by using the integrated C-Lok system. The series is made to enable toolless multiple array configurations, scalable from a single vertical line, to massive matrix like arrays. CLUSTER Series will be continuously expanded with various other fixtures, to enlarge the range of possibilities. ROXX Audience Blinder are available as 2-lite or 4-lite individually adjustable pods, in either a warmwhite or fullcolor version.
CLUSTER B2 W
In the warmwhite versions, an emulated ´shift to warm´ warms the color temperature of the light as it dims. To deliver a perfect classic tungsten look, Amber and Red LED´s are mixed with the highpower warmwhite LED´s when decaying. ROXX CLUSTER B2 W LED Blinder truly exceed the output of a conventional DWE blinder, while consuming 60% less power and being almost twice as bright and replaces the need of installing tungsten lamps at the rate of 500+ times.
CLUSTER B2 W
- 2 x 300 Watts
- WarmWhite + Amber + Red LED´s
- Up to 20.000lm luminous flux
- C-Lok Cluster System
- Magnetic Pre-Link system
- 2-lite Audience Blinder, Strobe, Wash
- IP65 rated for Indoor & Outdoor use
- Being almost twice as bright while consuming 60% less power compared to a conventional DWE blinder
- Emulated “shift to warm” to mimic incandescent fixtures
- Individually controllable Pods for stunning pixel effects
- Integrated C-Lok system for toolfree and seemless CLUSTER setups
- Pre-Link Magnets for easy alligning and “one-handed” operation
- Multiple mounting locations for creative rigging options & floor mount
- 16-bit dimming control for smooth, perfect fades
- Four selectable dimmer curves with adjustable response
- Adjustable PWM frequencies up to 25kHz guarantee flicker-free camera operation
- Individual pan of each pod to allow for directional adjustments
Individual +-20° PAN adjustment, TILT adjustment when fixture is in vertical use.
There are several mounting options – Camlock mounts on top and back enable the use of Omega-Brackets, Yokes can be attached to M12 mounting points on all sides, or the internal C-Lok system can be used for seemless interconnection. Pre-Link Magnets on top and side help to allign the fixtures and allows “one-handed” operation for secure locking.
A specially designed rigging bracket is used for seemless connection of multiple Blinders, to avoid gaps due to bracing of the truss structure by variable, sliding mounting positions.
CLUSTER rigging bracket
Continous rigging throughsliding mounting positions
Multiple mounting points:
- 3x Camlock with ¼ turn adapters
- 3x M 12mm / ½“
- 1x TV Spigot
Floor extensions and base plates can be used to create vertical structures in single or double rows.
CLUSTER yoke floor extensions
Protected with IP65
An IP65 rating is just what you need to protect your product from ingress of dust and rain. Our products are extensively tested to meet these standards and make our fixtures multifunctional, safe and durable in any situation.
|LED expected lifetime||50.000 hours|
|Lightsource||2x 300W Warm-White + Amber + Red|
|Type of optical system||Reflector with Compound Eye Lens|
|LED PWM Frequency||selectable 800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz|
|Beam angles (50%)||50°|
|Maximum Field angles (10%)||87°|
|Color temperature range||2.900K|
|Efficancy (max)||32 lm/W|
|Luminous flux||20.800 lm|
|illuminance Lux @ 1m / 3,3ft||21.228lx / 1972fcd|
|illuminance Lux @ 3m / 9,8ft||2360lx / 219fcd|
|illuminance Lux @ 5m / 16,4ft||870lx / 81fcd|
|illuminance Lux @ 7m / 23,0ft||440lx / 41fcd|
|illuminance Lux @ 10m / 32,8ft||218lx / 20fcd|
Dimensions & Weight
|Body material||Aluminum, Nylon|
|Lens material||Tempered glass front|
|Net dimensions (w x h x d)||400 x 200 x 191mm|
|Net dimensions inches||15,75 x 7,87 x 7,52 inches|
|Net weight (incl. Yoke)||10,5 kg (23,15lbs)|
|Tilt Locking System||Locking system with toothing and angle indicator|
|AC Power, max||90 – 285V 50/60Hz|
|AC Power, nominal||100 – 240V 50/60Hz|
|Electrical protection||Overload protection with automatic recover|
|Max power consumption||650W|
|Constant power consumption||220W|
|Power Max. Out||13A @ 230V / 9A @ 120V|
|Power Linking @ Max Power Consumption (Boost Mode)||4 units @ 230V / 1 unit @ 120V|
|Power Linking @ Constant Power Consumption (Illumination Mode)||15 units @ 230V / 6 units @ 120V|
|Power Factor||0.963 PF (230V) / 0.994 PF (120V)|
|Power Supply Unit||Inbuilt auto-ranging electronic switch-mode|
Operator & Controller
|DMX Functions||Master Dimmer, Master Dimmer Fine, Shutter, Duration, Dimmer 1-2, Dimmer 1-2 Fine, Dimmer Curve, Dimmer Response, Redshift, Effect, Device Settings|
|DMX channels||1CH DWE, 2CH DWE, 4CH DWE, 5CH STROBE, 7CH STANDARD (default), 10CH EXTENDED, 13CH EXTENDED|
|RDM ANSI E1.20|
|Setting and addressing||OLED graphical display / 4 controls|
|RDM ANSI E1.20|
|Standalone mode||Auto Program, Quick Light|
|Indicator||OLED graphical display|
|Controls||4 touch sensitive, backlighted controls|
|DMX I/O||IP65 XLR 5-pin male/female|
|Power In||TRUE1 compatible input & link-thru sockets|
|USB Firmware Update||IP65 USB socket|
|Mounting point by Yoke (included)||3x 13mm / 1/2″ holes, 1x centric TV Spigot attachement, 3x integrated Camlocks for Omega Brackets|
|Mounting point on fixture||1/4 turn Omega Bracket on top and rear side|
|Mounting point with otional Rigging Bracket||2x 13mm / 1/2″ holes for Clamp fixation|
|Rigging possibilities||Hanging or ceiling / pendant mount|
|Safety features||2x rear mount for safety wire|
|Minimum distance from flammable materials||0,3 meters (11,8 inch)|
|Cooling||Active, Forced Air, Temperature-regulated|
|Temperature range, Operating||-40°C to 45°C|
|Temperature range, Start-up||-20° to 45°C|
|Temperature range, Storage||-40°C to 80°C|
|Thermal Protection||Automatic overtemperature protection|
Included / Optional
|Included items||Yoke 4.1, 2m Power Cable, Puk|
|Optional Accessories||Yoke 2.2, Yoke 4.3, Yoke Floor Extension, Rigging Bracket, Omega Bracket ST|
|Color options||Black – RAL 9004 (Standard)|
|Custom color – any RAL (on request)|
|CE – 2014/30/EU: EMC Directive|
|CE – 2014/35/EU: Low Voltage Directive|
Case 4 pcs. /
Case 2 pcs /
The fixture is fully protected against dust and water jets from any direction.
Shift to warm
Switchable Shift-To-Warm function to simulate traditional halogen fixtures while dimming down.
ROXX CLUSTER Blinders consuming 60% less power comparing to classic DWE Blinders. Due to it´s LED lifetime of 50.000 hours it replaces the need of installing tungsten lamps (once blown) at the rate of 500+ times.
Four high resolution dimming curves and adjustable dimming response to adapt to the respective application.
Extensive stand alone modes for brilliant lighting effects even without the need of external controller.
The magnetic pre-link system helps to align ROXX fixtures and allows “one-handed” operation for secure locking.
Six selectable PWM frequencies up to 25kHz guarantees flicker free operation in front of camera, even at high-speed recordings.
Quick-light function allows a direct access to dimmer & CCT for easy and fast operation while setting lights.
The patented C-LOK system allows ROXX® devices to be connected together quickly and conveniently without tools.Scalable from a single vertical / horizontal line to massive matrix-like arrays.
OLED display with four touch-sensitive buttons, backlight- and auto flip function for easy configuration.
Temperature controlled fan
Temperature controlled fan for optimized and silent operation.
Maste & Slave
Once the fixture is set to “Master” and on first postion of the chain, it controls the following “Slave” units.
Remote Device Management enables bi-directional communication over DMX network, for external programming and monitring functions.
Besides the product compliance for european market this product is also FCC certified and complies to the requirements of the Federal Communications Commission.
ROXX® color calibration guarantees vivid and uniform colors plus excellent whites precisley on the black body curve.
16-bit technology for high-resolution color mixing and ultra-smooth dimming behaviour.
Besides the product compliance for european market this product is also ETL certified and complies to the safety norms and requirements for North-America.