JUST DOUBLE THE BÄÄÄM
Alle CLUSTER-Produkte lassen sich durch das integrierte C.LOK-System sowohl horizontal als auch vertikal einfach miteinander verbinden. Die Serie wurde entwickelt, um werkzeuglose Mehrfach-Array-Konfigurationen zu ermöglichen, die von einer einzelnen vertikalen Linie bis zu massiven matrixartigen Arrays skalierbar sind.
ROXX Audience Blinder sind als 2-Lites oder 4-Lites erhältlich, entweder in einer warmweißen oder vollfarbigen Version.
CLUSTER B2 W
Warm white
Bei der warmweißen Version wird die Farbtemperatur des Lichts beim Dimmen durch einen nachempfundenen „shift to warm“ Effekt erwärmt. Um einen perfekten klassischen Tungsten-Look zu erzielen, werden die Amber und roten LEDs beim Abklingen mit den warmweißen Hochleistungs-LEDs gemischt. ROXX CLUSTER B2 W LED Blinder übertreffen die Leistung eines konventionellen DWE Blinder, während sie 60% weniger Strom verbrauchen und fast doppelt so hell sind und die Notwendigkeit der Installation von Tungsten-Lampen um das 500-fache ersetzen.

CLUSTER B2 W
- 2 x 300 Watt
- Warmweiß + Amber + Rote LEDs
- Bis zu 20.000lm Lichtstrom
- C-Lok Cluster System
- Magnetisches Pre-Link System

- 2-Light Audience Blinder, Strobe, Wash für den Innen-/Außenbereich
- Emulierter „Shift to warm“ zur Nachahmung von Glühbirnenleuchten
- Individuelles Schwenken jedes Pods, um eine Richtungsanpassung zu ermöglichen
- Flexibles Interlocking-System für Truss-/Bodenmontage
- C-Lok für nahtlose CLUSTER-Setups
- Mehrere Montagepositionen für kreative Rigging-Optionen
- 16-Bit-Dimmsteuerung für sanfte, perfekte Überblendungen
- Einfach zu bedienendes OLED-Display mit berührungsempfindlichen und hintergrundbeleuchteten Bedienelementen
- DMX über 5-polige XLR In/Out-Anschlüsse
- Einzelpixel-/Pod-Steuerung
- Hoher CRI
- Einstellbare PWM-Frequenzen von bis zu 25kHz garantieren einen flimmerfreien Kamerabetrieb
- Vier wählbare Dimmerkurven mit einstellbarem Ansprechverhalten
1
FEATURES





2
MOUNTING
There are several mounting options – Camlock mounts on top and back enable the use of Omega-Brackets, Yokes can be attached to M12 mounting points on all sides, or the internal C-Lok system can be used for seemless interconnection. Pre-Link Magnets on top and side help to allign the fixtures and allows „one-handed“ operation for secure locking.




Continous rigging throughsliding mounting positions



- 3x Camlock with ¼ turn adapters
- 3x M 12mm / ½“
- 1x TV Spigot
3
FLOOR APPLICATION
Floor extensions and base plates can be used to create vertical structures in single or double rows.


4
Protected with IP65
An IP65 rating is just what you need to protect your product from ingress of dust and rain. Our products are extensively tested to meet these standards and make our fixtures multifunctional, safe and durable in any situation.
B2 W

Photometrics
LED expected lifetime | 50.000 hours |
Lightsource | 2x 300W Warm-White + Amber + Red |
Type of optical system | Reflector with Compound Eye Lens |
LED PWM Frequency | selectable 800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz |
Beam angles (50%) | 50° |
Maximum Field angles (10%) | 87° |
Color temperature range | 2.900K |
CRI/Ra | 80 |
Efficancy (max) | 32 lm/W |
Luminous flux | 20.800 lm |
illuminance Lux @ 1m / 3,3ft | 21.228lx / 1972fcd |
illuminance Lux @ 3m / 9,8ft | 2360lx / 219fcd |
illuminance Lux @ 5m / 16,4ft | 870lx / 81fcd |
illuminance Lux @ 7m / 23,0ft | 440lx / 41fcd |
illuminance Lux @ 10m / 32,8ft | 218lx / 20fcd |
Dimensions & Weight
IP class | IP65 |
IK class | IK08 |
Body material | Aluminum, Nylon |
Lens material | Tempered glass front |
Net dimensions (w x h x d) | 400 x 200 x 191mm |
Net dimensions inches | 15,75 x 7,87 x 7,52 inches |
Net weight (incl. Yoke) | 10,5 kg (23,15lbs) |
Tilt | 360° |
Tilt Locking System | Locking system with toothing and angle indicator |
Electrical Data
AC Power, max | 90 – 285V 50/60Hz |
AC Power, nominal | 100 – 240V 50/60Hz |
Electrical protection | Overload protection with automatic recover |
Max power consumption | 650W |
Constant power consumption | 220W |
Power Max. Out | 13A @ 230V / 9A @ 120V |
Power Linking @ Max Power Consumption (Boost Mode) | 4 units @ 230V / 1 unit @ 120V |
Power Linking @ Constant Power Consumption (Illumination Mode) | 15 units @ 230V / 6 units @ 120V |
Power Factor | 0.963 PF (230V) / 0.994 PF (120V) |
Power Supply Unit | Inbuilt auto-ranging electronic switch-mode |
Operator & Controller
DMX Functions | Master Dimmer, Master Dimmer Fine, Shutter, Duration, Dimmer 1-2, Dimmer 1-2 Fine, Dimmer Curve, Dimmer Response, Redshift, Effect, Device Settings |
DMX channels | 1CH DWE, 2CH DWE, 4CH DWE, 5CH STROBE, 7CH STANDARD (default), 10CH EXTENDED, 13CH EXTENDED |
DMX modes | 7 |
Protocol | USITT DMX512A |
RDM ANSI E1.20 | |
Setting and addressing | OLED graphical display / 4 controls |
RDM ANSI E1.20 | |
Standalone mode | Auto Program, Quick Light |
Wireless DMX | n.a. |
Indicator | OLED graphical display |
Controls | 4 touch sensitive, backlighted controls |
Strobe | 0-20Hz |
DMX I/O | IP65 XLR 5-pin male/female |
Power In | TRUE1 compatible input & link-thru sockets |
USB Firmware Update | IP65 USB socket |
Installation
Mounting point by Yoke (included) | 3x 13mm / 1/2″ holes, 1x centric TV Spigot attachement, 3x integrated Camlocks for Omega Brackets |
Mounting point on fixture | 1/4 turn Omega Bracket on top and rear side |
Mounting point with otional Rigging Bracket | 2x 13mm / 1/2″ holes for Clamp fixation |
Orientation | Any |
Rigging possibilities | Hanging or ceiling / pendant mount |
Safety features | 2x rear mount for safety wire |
Minimum distance from flammable materials | 0,3 meters (11,8 inch) |
Thermal Characteristics
Cooling | Active, Forced Air, Temperature-regulated |
Humidity (max.) | 95% |
Temperature range, Operating | -40°C to 45°C |
Temperature range, Start-up | -20° to 45°C |
Temperature range, Storage | -40°C to 80°C |
Thermal Protection | Automatic overtemperature protection |
Included / Optional
Included items | Yoke 4.1, 2m Power Cable, Puk |
Optional Accessories | Yoke 2.2, Yoke 4.3, Yoke Floor Extension, Rigging Bracket, Omega Bracket ST |
Color options | Black – RAL 9004 (Standard) |
Custom color – any RAL (on request) |
Compliance
CE – 2014/30/EU: EMC Directive |
EN 55103-2 |
EN 55015 |
EN 61547 |
EN 61000-3-2 |
EN 61000-3-3 |
EN 55032 |
CE – 2014/35/EU: Low Voltage Directive |
EN 60598-1 |
EN 60598-2-17 |
EN 62471 |
EN 60529 |
RoHS2 Directive |
2011/65/EU |
ETL C/US |
FCC |
UKCA |
Order Number
CLUSTER | Code |
B4 W | 13204001 |
B2 FC | 13202101 |
B4 FC | 13204101 |
Accessories | Code |
Yoke 2.2 | 13907001 |
Yoke 4.1 | 13907601 |
Yoke 4.3 | 13907101 |
Floor Extension | 13907201 |
Rigging Bracket | 13907411 |
Case 4 pcs. / | 13907411 |
Case 2 pcs / | 13907511 |
Omega Bracket | 90900002 |
- Manual
- DMX Chart
- Fixture Libraries
- Photometrics
- Light Distribution Curves
- Technical Drawing
- Certificates & Declaration
- Data Sheet
- Tender Documents
- Media
- Firmware Updates

Soon available!

Soon available!

Soon available!

Soon available!

IP 65

Shift to warm

Green Solution

Dimming curves

Stand Alone

Magnetic Pre-link

Flicker-free

Quicklight Function

C-LOK

OLED Display

Temperature controlled fan

Maste & Slave
Once the fixture is set to “Master” and on first postion of the chain, it controls the following “Slave” units.

RDM enable

FCC

Color Calibration

16-Bit Technology

Intertek
Accessories

Yoke 2.2

Yoke 4.3

Floor Extension

Rigging Bracket

Omega Bracket ST

Cases
CLUSTER Serie

CLUSTER B2 W
WarmWhite (Warm White + Amber + Red LED´s)

CLUSTER B2 FC
Full Color (RGBA + Warm White LED´s)

CLUSTER B4 W
(WarmWhite + Amber + Red LED´s)

CLUSTER B4 FC
Full Color (RGBA + Warm White LED´s)

CLUSTER S2
Pixel-mappable Hybrid Strobe/Wash
CLUSTER B2 W
WarmWhite
(WW + AR)
CLUSTER B2 FC
Full Color
(RGBA + WW)
CLUSTER B4 W
Warm White
(WW + AR)
CLUSTER B4 FC
Full Color
(RGBA + WW)
CLUSTER S2
Pixel-mappable
hybrid Strobe/Wash