CLUSTER S1
HIGH-POWER, PIXEL-MAPPABLE HYBRID STROBE/BAR
Mit 720 RGB-LEDs und 288 CW-LEDs liefert der CLUSTER S1 einen gewaltigen Output, der jedes Publikum in seinen Bann zieht. Mit 26 steuerbaren Segmenten sowohl auf RGB- als auch auf einzelnen Strobe-Linien haben Sie eine unvergleichliche Kontrolle über Ihre Lichtumgebung. Erleben Sie nahtlose Übergänge und atemberaubende Effekte mit dem kontinuierlichen Pixelabstand zwischen CLUSTER S1 und S2 Geräten.
- High-power, pixel-mappable hybrid strobe / washlight
- 720 x RGB LED´s & 288 x CW LED´s erzeugen eines massiven Output
- Je 26x steuerbare Segmente auf RGB- und einzelnen Strobelines
- Vollständige Farbmischung & abstimmbares Weiß mit hohem CRI
- LEine große Anzahl integrierter Pattern für die schnelle und einfache Erstellung beeindruckender Effekte
- IP65 für Indoor & Outdoor Anwendungen
- Integriertes C-Lok-System für werkzeuglose und nahtlose CLUSTER-Set-Ups
- Pre-Link-Magnete für einfaches Ausrichten und „Einhandbedienung“
Genießen Sie sanfte, perfekte Überblendungen mit der 16-Bit-Dimming-Steuerung, während einstellbare PWM-Frequenzen von bis zu 25 kHz einen flimmerfreien Kamerabetrieb garantieren, damit Ihre Visual in jedem Aufnahmeszenario makellos bleiben.
LICHT Konzept – CLUSTER S1
RGB Panel
Single High-Power Strobe lines
CLUSTER S1 – FEATURES
Mit unserem ROXX Cluster System und den gleichmäßigen Abständen der einzelnen LED-Zeilen lassen sich durchgehende Effekte über mehrere Geräte hinweg darstellen.Auf diese Weise verschmelzen die Geräte in horizontaler und vertikaler Ausrichtung zu einem großen Ganzen.
CLUSTER S1 – MOUNTING
Ob im Innen- oder Außenbereich, die Schutzart IP65 gewährleistet einen zuverlässigen Betrieb in jeder Umgebung.Mit dem integrierten C-Lok-System, das eine werkzeuglose und nahtlose CLUSTER-Konfiguration ermöglicht, gehören umständliche Aufbauten der Vergangenheit an. Pre-Link-Magnete vereinfachen die Ausrichtung und den Betrieb, sodass Sie sich auf die Entfaltung Ihrer Kreativität konzentrieren können.
CLUSTER rigging bracket G2
Continous rigging throughsliding mounting positions
CLUSTER Montage mit Yoke 4.2 (optional)
CLUSTER Montage mit Yoke 2.2 (optional)
Befestigung durch 13mm / 1/2″ zentrische Bohrung am Griff
CLUSTER Montage mit vertikalem Bracket.
Hängend & Bodenplatte
Floor Bracket
Mehrere Befestigungspunkte:
- 3x Camlock mit ¼-Dreh-Adaptern
- 3x M 12mm / ½“
- 1x TV Spigot
Dank des fortschrittlichen und werkzeuglosen Cluster-Mechanismus kann ROXX S1 mit allen Produkten der CLUSTER-Serie kombiniert werden, um Lichtdesignern neue kreative Möglichkeiten in horizontalen und vertikalen Konfigurationen zu bieten und ist für kleine bis große Veranstaltungsorte und Stadien geeignet.
CLUSTER S1 – Zubehöre
ROXX bietet auch eine breite Palette an magnetischen, leicht anzubringenden Zubehörfiltern an. Der Smoked Clear Filter ist besonders für TV-Anwendungen geeignet, da er die Geräte im ausgeschalteten Zustand optisch im Bühnenbild verschwinden lässt. Die beiden elliptischen Filter formen den Lichtstrahl entweder vertikal oder horizontal mit einem Frost-Effekt und bieten dem Anwender noch mehr Effektmöglichkeiten.
- FX Frame
- FX Filter Smoked Clear
- FX Filter Elliptical Horizontal
- FX Filter Elliptical Vertical
CLUSTER S1
Photometrics
LED expected lifetime | 50.000 hours |
Lightsource | 288 x CW LED´s (7000K), 720 x RGB LED´s |
Type of optical system | native, elliptical lens |
LED PWM Frequency | selectable 800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz |
Beam angles @ Full (50%) | 66° |
Maximum Field angles @ Full (10%) | tba |
Color temperature range | tba |
CRI/Ra @ Full | tba |
Efficancy @ Full (max) | tba |
Luminous flux @ Full | tba |
Luminous flux @ 2x Single Strobes (Boost Mode) | tba |
Luminous flux @ 2x Single Strobes (Illumination Mode) | tba |
Luminous flux @ 2x RGB Panel (Illumination Mode) | tba |
illuminance Lux @ 3m / 9,84ft (@ Full / Boost Mode) | tba |
illuminance Lux @ 3m / 9,84ft (@ 2x Single Strobes / Boost Mode) | tba |
illuminance Lux @ 3m / 9,84ft (@ RGB Panel) | tba |
Abmessungen & Gewicht
IP class | IP65 |
IK class | IK06 |
Body material | Aluminum, Nylon |
Lens material | Tempered glass front |
Net dimensions without Yoke (w x h x d) | 800 x 100 x 182,5mm |
Net dimensions inches | 31,49 x 3,93 x 7,19 inches |
Net weight | 12,84kg / 28,31lbs |
Tilt | 288° |
Tilt Locking System | Yoke positions included (optional Yoke) |
Elektrische Daten
AC Power, max | 90 – 285V 50/60Hz |
AC Power, nominal | 100 – 240V 50/60Hz |
Electrical protection | Overload protection with automatic recover |
Max power consumption | 1010W |
Constant power consumption (Illumination Mode) | 215W |
Power Max. Out @ Max. Power Consumption | 3,97A @ 230V (910W) / 11,3A @ 100V (970W) |
Power Max. Out @ Constant Power Consumption | 0,99A @ 230V (215W) / 2,24A @ 100V (220W) |
Power Linking @ Max Power Consumption (Boost Mode) | 3 units @ 230V / 0 unit @ 100V |
Power Linking @ Constant Power Consumption (Illumination Mode) | 11 units @ 230V / 4 units @ 100V |
Power Factor @ Max. Power Consumption (Boost Mode) | 0.88PF @ 100V / 1,00PF @ 230V |
Power Factor @ Constant Power Consumption (Illumination Mode) | 0,985PF @ 100V / 0,981 PF @ 230V |
Power Supply Unit | Inbuilt auto-ranging electronic switch-mode |
Operator & Controller
DMX channels | 12CH Simple, 27CH Easy, 44CH Standard, 138CH Pure, 269CH Pure Extended Mode, 166CH Full Access, 297CH Full Access Extended, 100CH Pure S2 Merge Mode |
DMX modes | 8 |
Protocol | |
USITT DMX512A | |
RDM ANSI E1.20 | |
Art-Net | |
sACN | |
Setting and addressing | OLED graphical display / 4 controls |
RDM ANSI E1.20 | |
Standalone mode | Auto Program, Color Macro, Quick Color, Tunable White, User Color |
Wireless DMX | n.a. |
Indicator | OLED graphical display |
Controls | 4 touch sensitive, backlighted controls |
Strobe | 0-30Hz |
DMX I/O | IP65 XLR 5-pin male/female |
Ethernet I/O | IP65 RJ45 Ethernet male/female |
Power In | TRUE1 compatible input & link-thru sockets |
USB Firmware Update | IP65 USB socket |
Installation
Mounting point on fixture top & rear side | 2x 1/4 turn Omega Bracket |
Mounting point with optional Rigging Bracket G2 | 2x/4x 13mm / 1/2″ holes for Clamp fixation |
Mounting point by optional Yokes (vertial mount) | 1x/3x 13mm / 1/2″ holes, 1x centric TV Spigot attachement, 1x/3x integrated Camlocks for Omega Brackets |
Orientation | Any |
Rigging possibilities | direct or due optional rigging accessories |
Safety features | 2x rear mounts for fixture & accessory safety wire |
Minimum distance from flammable materials | 0,3 meters (11,8 inch) |
Thermische Eigenschaften
Cooling | Active, Forced Air, Temperature-regulated |
Humidity (max.) | 95% |
Temperature range, Operating | -40°C to 45°C |
Temperature range, Start-Up | -20° to 45°C |
Temperature range, Storage | -40°C to 80°C |
Thermal Protection | Automatic overtemperature protection |
Inklusive / Optional
Included items | 2x Puk, 2m Power Cable |
Optional Accessories | FX Filter Vertical, FX Filter Horizontal, FX Filter Smoked Clear, FX Distance Frame, Yoke 2.2, Yoke 4.2, Yoke 4.3, Yoke Floor Extension, Floor Bracket, Vertical Bracket, Rigging Bracket G2, Omega Bracket ST |
Color options | Black – RAL 9004 (Standard) |
Custom color – any RAL (on request) |
Compliance
CE – 2014/30/EU: EMC Directive |
EN 55103-2 |
EN 55015 |
EN 61547 |
EN 61000-3-2 |
EN 61000-3-3 |
EN 55032 |
CE – 2014/35/EU: Low Voltage Directive |
EN 60598-1 |
EN 60598-2-17 |
EN 62471 |
EN 60529 |
RoHS2 Directive |
2011/65/EU |
ETL C/US |
FCC |
UKCA |
Bestellnummern
CLUSTER | Code |
S2 | 13305101 |
Accessories | Code |
FX Distance Frame | 13908901 |
FX Filter Smoked Clear | 13908801 |
FX Filter Elliptical Horizontal | 13908601 |
FX Filter Elliptical Vertical | 13908701 |
Yoke 2.2 | 13907001 |
Yoke 4.2 | 13907701 |
Yoke 4.3 | 13907101 |
Floor Extension | 13907201 |
Rigging Bracket G2 | 13907411 |
Omega Bracket | 90900002 |
Floor Bracket | 13908501 |
Vertical Bracket | 13908401 |
- Manual
- DMX Chart
- Pattern Chart
- Pixel Chart
- Fixture Libraries
- Photometrics
- Light Distribution Curves
- Technical Drawing
- UK-Declaration of Conformity
- EU-Declaration of Conformity (DoC)
- Datenblatt
- Tender Documents
- Media
- Firmware Updates
Soon available!
Soon available!
Soon available!
Soon available!
IP 65
The fixture is fully protected against dust and water jets from any direction.
Shift to warm
Switchable Shift-To-Warm function to simulate traditional halogen fixtures while dimming down.
Green Solution
ROXX CLUSTER Blinders consuming 60% less power comparing to classic DWE Blinders. Due to it´s LED lifetime of 50.000 hours it replaces the need of installing tungsten lamps (once blown) at the rate of 500+ times.
Dimming curves
Four high resolution dimming curves and adjustable dimming response to adapt to the respective application.
Stand Alone
Extensive stand alone modes for brilliant lighting effects even without the need of external controller.
Magnetic Pre-link
The magnetic pre-link system helps to align ROXX fixtures and allows „one-handed“ operation for secure locking.
Flicker-free
Six selectable PWM frequencies up to 25kHz guarantees flicker free operation in front of camera, even at high-speed recordings.
Quicklight Function
Quick-light function allows a direct access to dimmer & CCT for easy and fast operation while setting lights.
C-LOK
The patented C-LOK system allows ROXX® devices to be connected together quickly and conveniently without tools.Scalable from a single vertical / horizontal line to massive matrix-like arrays.
OLED Display
OLED display with four touch-sensitive buttons, backlight- and auto flip function for easy configuration.
Temperature controlled fan
Temperature controlled fan for optimized and silent operation.
Maste & Slave
Once the fixture is set to “Master” and on first postion of the chain, it controls the following “Slave” units.
RDM enable
Remote Device Management enables bi-directional communication over DMX network, for external programming and monitring functions.
FCC
Besides the product compliance for european market this product is also FCC certified and complies to the requirements of the Federal Communications Commission.
Color Calibration
ROXX® color calibration guarantees vivid and uniform colors plus excellent whites precisley on the black body curve.
16-Bit Technology
16-bit technology for high-resolution color mixing and ultra-smooth dimming behaviour.
Intertek
Besides the product compliance for european market this product is also ETL certified and complies to the safety norms and requirements for North-America.
Art-Net / sACN
The fixture is compatible with Art-Net and sACN protocols. DMX-512/ RDM data is transmitted via an Ethernet connection.
Zubehöre
Yoke 4.1
Yoke 4.3
Yoke 2.2
Floor Extension
S1 - FX Distance Frame
S1 - FX Filter Smoked Clear
S1 - FX Filter Elliptical Horizontal
S1 - FX Filter Elliptical Vertical
Rigging Bracket G2
Vertical Bracket
Floor Bracket
Omega Bracket ST
Cases
CLUSTER Serie
CLUSTER S1
Pixel-mappable Hybrid Strobe/Wash
CLUSTER S2
Pixel-mappable Hybrid Strobe/Wash
CLUSTER B4 W
(WarmWhite + Amber + Red LED´s)
CLUSTER B2 W
WarmWhite (Warm White + Amber + Red LED´s)
CLUSTER B2 FC
Full Color (RGBA + Warm White LED´s)
CLUSTER B4 FC
Full Color (RGBA + Warm White LED´s)
CLUSTER B2 W
WarmWhite
(WW + AR)
CLUSTER B2 FC
Full Color
(RGBA + WW)
CLUSTER B4 W
Warm White
(WW + AR)
CLUSTER B4 FC
Full Color
(RGBA + WW)
CLUSTER S2
Pixel-mappable
hybrid Strobe/Wash
CLUSTER S1
Pixel-mappable
Hybrid Strobe/Bar